Today, the editor will introduce to you the use of iron oxide desulfurizer. I hope it can help you! Filling
The quality of desulfurizer filling directly affects the use effect and must be paid enough attention to. The entire desulfurizer filling process should be handled by a dedicated person and pay attention to the following points
) Lay a second layer of mesh on the grating board of the desulfurization tower. The holes are smaller than the purpose stainless steel mesh.
Lay a thick layer of broken coke blocks on the wire mesh.
Since dust will be generated during transportation, loading and unloading, it needs to be screened before loading.
Use a special filling tool. The discharge pipe should be able to rotate freely so that the material can be evenly filled around the reactor. It is strictly forbidden to pour desulfurizer from the middle to prevent uneven filling.
During use, the strength of the desulfurizer increases with the increase in sulfur absorption, so it should be loaded in layers in the desulfurization tower. Each layer is marked according to the filling height of the desulfurizer to ensure that it is fully loaded and evenly loaded.
During the filling process, it is strictly prohibited to directly step on the sulfur agent. You can place wooden boards on the material layer before entering to remove the material and check the filling situation.
The inlet of the desulfurization raw gas should be installed with grating plates or broken coke blocks to prevent the desulfurization agent from being blown away.
Usage
The desulfurization tower generally does not need to be specially heated and consumes energy. However, the outdoor desulfurization device must be kept warm in winter to prevent gas supercooling from reducing the activity of the desulfurizer and water accumulation on the bed to worsen the operation.
Tar and water should be removed before desulfurization.
The desulfurizer can be replaced all at once or section by section according to the direction of air flow.
Regular discharge of water in the water separator in front of the desulfurization tower and the water at the bottom of the desulfurization tower is strictly prohibited from entering the desulfurization tower with gas and liquid.
The operation must be stable and the use must be reasonable to exert its excellent performance.
Transportation
During transportation, the desulfurizer should be transported with care to avoid vibration and collision to avoid damage.
During storage, the desulfurizer must be protected from absorption and chemical contamination.
If you have any other questions about the use of iron oxide desulfurizer, please come to our company for consultation.
Iron oxide desulfurizer hot sale